With a system for a secure energy supply.
ENB type series
The ENB series are DC UPS systems that have been specially developed for electro-acoustic systems (ELA) and electro-acoustic emergency systems (ENS) in compliance with EN 50849. This type series has been used for decades wherever no connection to a fire alarm system is required. The modular design ensures a very high level of device availability, as the cassette inserts allow components to be replaced quickly. Redundant operation (N+1) is also possible. This type series is compatible with the LBD devices supplied in the past.
● 19" DC UPS for unloaded or loaded standby parallel operation
● Complies with EN 50849 / VDE 0828
● 12 fused outputs
● System monitoring with potential-free changeover contacts
● Temperature-controlled charging voltage compliant with DIN 41773-1
● Additional 24V output for 48V devices
● Replacement for LBD devices
● Ready-to-connect device
● Low weight
DC UPS for ELA, ENS without connection to BMA
ESB-GMA type series
The ESB-GMA series are DC UPS systems that have been specially developed for voice alarm systems (SAA) in compliance with EN 54-4. This type series has been used successfully on the market for decades. In contrast to other manufacturers, our devices have been tested by VdS as a non-integrated power supply compliant with EN 54-4. This means that the power supplies can be operated with all SAA compliant with EN54-16, regardless of the manufacturer in the system network. It is important that the performance data corresponds to the SAA to be supplied. This type series is compatible with the PRS, PLN and PMX devices supplied in the past.
● 19" DC UPS for unloaded or loaded standby parallel operation
● Complies with EN54-4
● 12 fused outputs
● System monitoring with potential-free changeover contacts
● Temperature-controlled charging voltage compliant with DIN 41773-1
● Additional 24V output for 48V devices
● Battery monitoring with active balancing
● Complies with the requirements of DIN VDE 0833-4
● Replacement for PRS, PLN and PMX devices
● Ready-to-connect device
● Low weight
● DC UPS for ENS and SAA as well as BMA
CBI type series
Die anschlussfertigen Geräte entsprechen unserer Qualitätsstufe für Industrielade- u. Stromversorgungsgeräte. Die Geräte verfügen über einen hohen Wirkungsgrad und enorme Leistungsreserven. So können die Geräte für einen kurzen Zeitraum bis zu 300% überlastet werden, was gerade bei Verbrauchern mit einem hohen Anlaufstrom von Bedeutung ist. Die Geräte können als reine Ladegeräte zum Wiederaufladen von wartungsfreien Bleiakkumulatoren oder zur permanenten sowie notstromgestützten Versorgung von Gleichstromverbrauchern im belasteten Bereitschaftsparallelbetrieb eingesetzt werden. Hierbei wird über den Micro-Controller sichergestellt, dass eine automatische Stromaufteilung zwischen Verbraucher und Batterieladung erfolgt. Die Geräte verfügen über eine spezielle 3‑stufige „Boost“, „Trickle“, „Recovery“ Ladekennlinie. Die Ladekennlinie entspricht der Norm DIN 41773–1 (temperaturgeführte Ladespannung) und eignet sich speziell zum Laden von verschlossenen Blei/Kalzium-Akkumulatoren im Bereitschaftsparallelbetrieb. Optional stehen auch Ladeprofile für Li-Ion Akkumulatoren zur Verfügung. Die integrierte Systemüberwachung meldet über LED und über potentialfreie Kontakte den Status des Systems hierbei werden Batterie Life-Tests durchgeführt. Die Batterien werden ebenfalls vor Tiefentladung geschützt. Die Montage im Schaltschrank erfolgt auf einer symmetrischen Tragschiene (Hutschiene). Die Geräte können mit entsprechenden Batteriemodulen kombiniert werden. Hierzu stehen Module mit Batteriekapazitäten von 1.2Ah bis 15Ah zur Verfügung. Für größere Batteriekapazitäten können Batteriewinkel für die Schrankmontageplatte geliefert werden.
● DC UPS for loaded standby parallel operation
● Complies with EN 60950 /UL60950-1 and CSA C22.2 No. 60950-1-07
● Compact design for top-hat rail mounting
● System monitoring with potential-free signal contacts
● Temperature-controlled charging voltage compliant with DIN 41773-1
● 12VDC, 24VDC and 48VDC devices
● Extremely overload-capable for short periods
● Partially N+1 or parallel switchable (depending on type)
● MTBF IEC 61709 > 300,000 h
● Ready-to-connect devices
● Low weight
● Switch cabinet construction
● Mechanical engineering
● Telecontrol and communications engineering
● Security and building technology
● Renewable energy
● Automation technology